JUKI KE-1070 Maintenance Manual page 32

1-7-2. Replacing the Y-Axis Plastic Rail
(1) Loosen the NM3061232TN and remove the X-axis plastic rail from the nut plate. Loosen the
SL3061232TN and remove the Y-axis plastic rail from the X-frame end assembly.
(2) Loosen the SL6061092TN and detach the cable clamp YB.
(3) Open the flap of the Y-axis plastic rail to remove the cables, and replace the Y-axis plastic rail.
(4) Reassemble the components in the reverse order of disassembly. At this time, pay special
attention so that the cables in the plastic rail are properly arranged and not entangled.
Cable clamp YB
Cable clamp
rubber Y
Maintenance Guide
Y-Axis Plastic Rail (Part No. 40046022)
Figure 1-7-2-1
1-22
Nut plate
Y-axis plastic rail
X-frame end L assembly
Cover CUL