Chapter 4: Setting Up The Interactive Flat Panel - Smart Technologies SMART kapp iQ Pro 55 Administrator's Manual

Chapter 4
Setting up the interactive flat panel
Turning on the interactive flat panel and room computer for the first time
Enabling the Whiteboard library
Installing SMART Meeting Pro software
Switching between input sources
Displaying multiple input sources
Configuring the network
Configuring the network for the Screen Share app
Evaluating the impact of Screen Share on your network data usage
Configuring the network for automatic SMART kapp iQ Pro system software updates
Adding a proxy
After mounting the SMART kapp iQ Pro interactive flat panel (see Chapter 2: Mounting the
interactive flat panel on page 11) and connecting power and devices (see Chapter 3: Connecting
power and devices on page 15), you can turn on and set up the interactive flat panel.
NOTE
The setup process documented below might vary depending on which AM30 appliance is
installed in your interactive flat panel.
23 smarttech.com/kb/171000
24
25
25
25
26
26
26
27
28
28