Appendix E: Remotely Managing The Interactive Flat Panel; Connecting A Computer To The Interactive Flat Panel - Smart Technologies SMART kapp iQ Pro 55 Administrator's Manual

Appendix E
Remotely managing the
interactive flat panel
Connecting a computer to the interactive flat panel
Configuring the computer's serial interface settings
Power modes
Commands and responses
SMART kapp iQ Pro 55 and 65 command inventory
Power state
Source
Video
Audio
System information
SMART kapp iQ Pro 65-V2 and 75 command inventory
Power state
Source
Video
Audio
Multi-Window
System information
You can connect a computer to the room control input on the SMART kapp iQ Pro interactive flat
panel to remotely select video inputs, turn the interactive flat panel on or off and get information
about the interactive flat panel's current settings, such as contrast and power state.
Connecting a computer to the
interactive flat panel
To connect a computer to the interactive flat panel
Connect an RS-232 cable from the computer's serial output to the room control input on the
connector panel.
81 smarttech.com/kb/171000
81
82
83
83
85
85
86
86
88
89
91
92
92
93
95
95
97