Removing And Transporting The Interactive Flat Panel; Preventing Condensation; Maintaining Pens; Removing The Interactive Flat Panel - Smart Technologies SMART kapp iQ Pro 55 Administrator's Manual

CHAPTER 5
MAINTAINING THE INTERACTIVE FLAT PANEL

Preventing condensation

The interactive flat panel screen contains layers of glass that can collect condensation, especially
in the following conditions:
Temperature extremes with high humidity
l
Rapid changes in humidity, which can occur when you operate the product near water (such as
l
a pool, kettle or air conditioner ventilator)
Direct exposure to sunlight
l
To evaporate condensation from the interactive flat panel
1. Remove the humidity source from the interactive flat panel, if possible.
2. Turn off the interactive flat panel.
3. Remove any moisture from the interactive flat panel with a smooth, dry cloth.
4. Leave the interactive flat panel turned off for 48 hours.

Maintaining pens

To prevent damage to the interactive flat panel's anti-glare coating, replace a pen if its nib
becomes worn. You can purchase replacement pens from the Store for SMART Parts
(see smarttech.com/Support/PartsStore).
Removing and transporting the
interactive flat panel
On occasion, you might need to remove the SMART kapp iQ Pro interactive flat panel from its
current location and transport it to another location.
Removing the interactive flat panel
To remove the interactive flat panel safely, use two or more professional installers.
WARNING
Do not attempt to move the interactive flat panel by yourself. The interactive flat panel is
l
very heavy.
Do not move the interactive flat panel by connecting a rope or wire to the handles on the
l
back. The interactive flat panel can fall and cause injury and product damage.
43 smarttech.com/kb/171000