Smart Technologies SMART kapp iQ Pro 55 Administrator's Manual page 96

APPENDIX E
REMOTELY MANAGING THE INTERACTIVE FLAT PANEL
To view a list of available commands
Type ? at the command prompt, and then press ENTER.
To identify the current value of a setting
Use the get command.
This example shows how to get the contrast level:
>get contrast
contrast=55
To identify the current value of a setting for a specific video input
Use the get command and specify the video input.
This example shows how to get the contrast level for the HDMI video input:
>get contrast hdmi1
contrast hdmi1=65
NOTE
You must connect the video input to the interactive flat panel to identify a value for it, but
the video input doesn't need to be in use.
To assign a value to a setting
Use the set command.
This example sets the contrast level to 65:
>set contrast=65
contrast=65
To assign a value to a setting for a specific video input
Use the set command and specify the video input.
This example sets the contrast level to 70 for the HDMI video input:
>set contrast hdmi1=70
contrast hdmi1=70
84 smarttech.com/kb/171000