Resetting The Interactive Flat Panel And Am30; Updating Firmware And Software; Updating Firmware - Smart Technologies SMART kapp iQ Pro 55 Administrator's Manual

CHAPTER 5
MAINTAINING THE INTERACTIVE FLAT PANEL
Transporting the interactive flat panel
This chapter describes common maintenance procedures for the interactive flat panel.
Resetting the interactive flat panel and AM30
You can reset the interactive flat panel and AM30 (if installed) using the front control panel.
To reset the interactive flat panel and AM30
Press and hold the Standby button
The interactive flat panel and AM30 reset.

Updating firmware and software

SMART periodically releases updates to the SMART kapp iQ Pro interactive flat panel's firmware
as well as to SMART software. Install these updates for the best experience.

Updating firmware

The interactive flat panel uses firmware on its processor. Updates to SMART software could
include a firmware update in the form of a downloaded firmware executable file. When the
interactive flat panel detects this executable file, you're prompted to run the file to update the
firmware.
CAUTION
Only a system administrator should update interactive flat panel firmware.
l
Only one interactive flat panel can be connected to the computer during the firmware
l
update.
Do not disconnect the interactive flat panel from your computer during the firmware update.
l
Do not touch the interactive flat panel screen or input button during the firmware update.
l
Do not turn off your computer or the interactive flat panel during the firmware update.
l
30 smarttech.com/kb/171000
until the screen turns black.
44