CHAPTER 5
MAINTAINING THE INTERACTIVE FLAT PANEL
Connecting to a network
The SMART kapp iQ Pro interactive flat panel can connect to a network using either a Wi-Fi or
wired connection.
Connecting to a Wi-Fi network
To connect to a Wi-Fi network
1. If an Ethernet cable is connected to the AM30 appliance, disconnect it.
2. Press the Home button
3. Press Settings
4. Press Wi-Fi.
NOTE
Ensure the toggle for Wi-Fi is On.
5. Select a wireless network.
6. Enter the Wi-Fi password in the Password field, and then press Connect.
TIP
Use the crosshairs to move the keyboard.
Connecting to a wired Ethernet network
To connect to a wired Ethernet network
NOTE
The network must provide network settings via DHCP.
Connect an Ethernet cable to the RJ45 receptacle on the AM30 appliance.
See AM 30 connector panel on page 18 for more information about connecting to a wired network.
36
smarttech.com/kb/171000
on the screen to open the launcher.
in the launcher.