Maintenance
6. Clean the brush and wick with water and rinse thoroughly.
7. Place the wick back in the metal grate and replace the grate in the moistener base.
8. Slide the moistener brush back into the holder.
9. Replace the moistener brush assembly on top of the moistener base and secure with the plastic
thumbscrew.
10. If your envelopes still are not sealing properly, you can order a Moistener Replacement Kit (part
number 621-8) by calling 1-800-243-7824.
Filling the moistener tank
Your device will need refills of E-Z Seal® in order to seal envelopes. Follow these steps to fill the
moistener tank.
Pitney Bowes
Operator Guide
April 2022
193