Sealing The Envelope Only, Bypass All Printing; Filling The Moistener Tank; Installing The Ink Cartridge - Pitney Bowes SendPro C Operator's Manual

Quick start guide

Sealing the envelope only, bypass all printing

1. Tap Envelope Printing on the Home screen.
2. Tap Print Mode on the lower left side of the Envelope Printing mail screen. You may have to
swipe up on the screen to see this option.
3. Select Seal Only.
4. Tap Apply.
5. Place your envelope face up, flap down into the feeder. Be sure to slide the envelope flap under
the edge of the feed deck

Filling the moistener tank

1. Check the level of sealing solution in your moistener tank.
2. Add enough E-Z Seal® to bring the sealant level up to the bottom of the fill hole. Do not overfill
your tank.
3. If the tank is empty, allow 30 minutes for the moistener brush and wick to get completely saturated.

Installing the ink cartridge

1. Tap the Settings (gear) icon in the global toolbar.
2. Scroll down and tap Mail Printer Maintenance or Envelope Printer Maintenance.
3. Tap Install Ink.
4. Lift the cover. The ink cartridge moves to the front position.
5. Remove the ink cartridge, as shown on the label next to the cartridge holder.
Pitney Bowes Operator Guide July 2019 14