Using Usps Special Services; Entering The Weight Manually When Printing Postage - Pitney Bowes SendPro C Operator's Manual

Printing on envelopes
If you already printed today's date and postage on an envelope, but you missed your mail pickup, you
can re-date the mail. You must print a future date on the back of the envelope before you can mail it.
You can only re-date one envelope at a time, even if you are feeding envelopes automatically.
1. Tap Envelope Printing on the Home screen.
2. Scroll down and tap Print Mode.
3. Tap Date Correction.
4. Tap Apply.
5. Tap on the date.
6. Tap Tomorrow or Another Date, depending on the date you need.
7. Tap Apply after you select the new date.
8. Turn the envelope over to the blank side.
9. Place the envelope on the feed deck. Depending on the SendPro C model you have, feed the
envelope manually or tap Start to feed the envelope. The word "Redate" appears on the newly
printed print on the back of the envelope.

Using USPS special services

You can select additional services for your mail. These include Certified Mail, Insured Mail, Delivery
Confirmation, Registered Mail and more. The number and types of services available depend on the
class of mail.
1. Tap Envelope Printing on the Home screen.
2. Tap Class.
3. Tap Start Over to see a list of the available classes.
4. Tap the class you wish to use. Sub-classes appear when available for the selected class.
For some classes, you must select the type of mailpiece. For example, if you select First-
l
Class Retail Metered, you must select either Letter, Large Envelope, or Package.
5. Select any special services you wish to use.
6. Enter a ZIP code if required.
7. For some classes, you need to either scan or manually enter the Electronic Certified barcode
from your label. Then, attach your label to your envelope or package.
8. Tap Apply.

Entering the weight manually when printing postage

Enter the weight of a mailpiece when you know its weight and are not using the scale.
Pitney Bowes Operator Guide April 2022 149