Adapt The Voltage - KaVo Everest engine Base Camp 4140 Assembly Instructions Manual

Assembly instructions Everest
|
5 First use 5.3 Installation
CAUTION
engine Base Camp 4140
®
Connect the compressed air service unit
Damage as a result of incorrect fitting
Damage may occur if it is not fitted correctly
▶ Fit the maintenance unit of the compressed air line vertically.
▶ Connect compressed air line ① to supply available in the building.
See also: "Technical data" in the instructions for use
▶ Set air pressure on the manometer of the maintenance unit ② to 5.5 bar.

5.3.3 Adapt the voltage

▶ Ensure that the nominal voltage and nominal frequency of the milling/grinding
unit corresponds to the nominal voltage and nominal frequency of the building
wiring.
▶ Disconnect the power entry module ① from the power supply and pull out the
fuse drawer ③ from the power entry module.
▶ Remove the fuse holder ② from the fuse drawer and turn it so that the required
voltage value appears in the inspection window.
14/51