Do A Reference Run - KaVo Everest engine Base Camp 4140 Assembly Instructions Manual

Assembly instructions Everest
|
6 Settings for service

6.3 Do a reference run

engine Base Camp 4140
®
6.3 Do a reference run
Note
After installing the KaVo Everest Engine or changing a power supply, each axis
must separately do a reference run.
The five axes and their positions:
▪ Spatial axis X (horizontal)
▪ Spatial axis Y (orthogonal)
▪ Spatial axis Z (vertical)
▪ Rotary axis A (gripping yoke)
▪ Rotary axis B (double spindle)
▶ In the CNC/MMI software, go to the menu "MANual" and click the button "Re‐
ference run" (F4).
▶ Click the button "Z axis" (F3), and press the function key Start on the control
panel. Make sure that only the button "Z axis" (F3) has a green background. All
of the other axes must be deactivated.
The Kavo Everest Engine does a reference run in the Z direction.
▶ Click the button "Y axis" (F2), and press the function key Start on the control
panel. Make sure that only the button "Y axis" (F2) has a green background. All
of the other axes must be deactivated.
The Kavo Everest Engine does a reference run in the Y direction.
▶ Click the button "X axis" (F1), and press the function key Start on the control
panel. Make sure that only the button "X axis" (F1) has a green background. All
of the other axes must be deactivated.
The Kavo Everest Engine does a reference run in the X direction.
Y
B
24/51
A