Connect The Cooling Lubricant - KaVo Everest engine Base Camp 4140 Assembly Instructions Manual

Assembly instructions Everest
|
5 First use 5.3 Installation
① Mains cable for the cooling lubricant
pump
② Aerosol exhaust power cable
③ Cooling lubricant supply hose
engine Base Camp 4140
®

5.3.5 Connect the cooling lubricant

④ Connecting cable between power
supply and pump
⑤ Aerosol exhaust hose
⑥ Cooling lubricant drain hose
▶ In the cooling lubricant container, mix ① part cooling lubricant concentrate
(Mat. no. 1.001.6002) with 24 parts clean tap water.
▶ Connect the cooling lubricant supply hose ③.
▶ Connect the cooling lubricant drain hose ⑥
▶ Connect the power cables for the cooling lubricant pump ① .
▶ Connect the power cable for the aerosol exhaust ② .
▶ Connect the aerosol exhaust hose ⑤. Make sure that the aerosol exhaust hose
is connected so that it can be run at a downward slope. It may not sag.
17/51