Insert The Everest Insert - KaVo Everest engine Base Camp 4140 Assembly Instructions Manual

Assembly instructions Everest
7 Calibrate the Everest engine Base Camp 4140
engine Base Camp 4140
®
▶ Insert a four unit gripping yoke, press it as far back as it will go, and screw both
sides tight.
▶ Close the door of the milling/grinding unit.
▶ Press the Start function key on the control panel.
The four unit gripping yoke cannot be selected in the gripping yoke selection field.
However, it needs to be inserted to make the calibration piece.

7.2.4 Insert the Everest Insert

▶ Prepare the workpiece according to processing instructions
(Mat. no. 1.002.2090).
▶ Embed the Everest T blank (16) (Mat. no. 1.003.0256) using the positioner
(Mat. no. 1.002.1762) in the Everest insert (Mat. no. 1.002.1759).
|
7.2 Mill the calibration body
31/51