KaVo Everest engine Base Camp 4140 Assembly Instructions Manual page 27

Assembly instructions Everest
|
6 Settings for service 6.3 Do a reference run
engine Base Camp 4140
®
▶ Click the button "A axis" (F4), and press the function key Start on the control
panel. Make sure that only the button "A axis" (F4) has a green background. All
of the other axes must be deactivated.
The Kavo Everest Engine does a reference run in the A direction.
▶ Click the button "B axis" (F5), and press the function key Start on the control
panel. Make sure that only the button "B axis" (F5) has a green background. All
of the other axes must be deactivated.
The Kavo Everest Engine does a reference run in the B direction.
▶ Go the the menu "SYStem", and close the MMI software by clicking the button
"End CNC".
▶ Enter the password "IBHAJ".
25/51