Introduction - sauter FL series Instruction Manual

1 Introduction

Thank you for choosing the SAUTER FL series instrument. With correct use and
regular re-calibration it will give many years of accurate and reliable service.
The FL can measure tensile and compressive forces accurately, being simply used
by the operator. It may be used handheld or mounted on a fixture or test stand.
SAUTER offers software and accessories to make the force gauge even more
versatile. Ask your SAUTER distributor for additional information or visit our website
at www.sauter.eu
2 Before Use
After having received the unit please check that no physical damage has occurred to
the packaging material, plastic case or the instrument itself. If any damage is evident,
please notify SAUTER immediately.
3 Operation Overview
The most common used features (such as displaying force, peak hold, zero and
changing of displayed units) can all be done by pressing a single dedicated key
identified on the front panel-see the Basic Functions section.
You can press a menu key to access the gauge configuration- see the Main Menu
section.
The FL is supplied with a set of 4 Nickel Metal Hydride AAA rechargeable batteries.
For safety reasons during transportation the batteries are shipped discharged. To
obtain maximum battery life we recommend that you charge them with the
charger/adaptor supplied for at least 14-16 hours when you first receive the
instrument.
4 Battery Indicator
battery supply > 4.8 V
4.8 V > battery supply > 4.7 V
4.7 V > battery supply > 4.4 V
4.4 V > battery supply > 4.0 V
battery supply < 4.0 V
If battery level is less than 3.9 V, The "battery empty" message will be displayed and
the gauge will power down automatically.
5 Fitting Accessories
Couple fittings directly to the load cell stem or use an extension rod. The threads are
M6 and have capacities up to 2500 N.
FL-BA-e-1714 3