Advertisement
Environment and Product Type
5.3
Product Types
5.3.4
Set the Capture Camera
Set the image capture camera for each type.
Two cameras can be connected (camera A and camera B), so select from among the
following five possibilities.
A: Capture images with camera A only (don't capture with camera
B: Capture images with camera B only (don't capture with camera
AB: Capture images with both cameras A and B simultaneously.
AB Vertical: Camera A captures the left half of the image, and camera B
AB Horizontal: Camera A captures the top half of the image, and camera B
Notes
If you are only connecting one camera, connect it to the
Camera A port. Capture errors may occur if you connect it to
the Camera B port.
Only one internal synchronizing camera can be connected, so
only A can be selected.
When the settings for the capture camera are changed, all
saved image data (including locked data) is erased.
In the case that an external device switches the type set for
the capture camera to a different type, image capture is not
performed when the type is switched.
Therefore, in the case that the display image of the changed
type is a memory image, after the type is switched, no image
is displayed until the next image is captured.
5 − 16
B). Checkers set for camera B do not scan.
A). Checkers set for camera A do not scan.
captures the right half, and the image is composed as a memory
(camera) A image.
Only the checkers set for camera A execute.
captures the bottom half, and the image is composed as a
memory (camera) A image.
Only the checkers set for camera A execute.
OCR Type A230
Advertisement
