Advertisement
Communications (Serial and Parallel)
16.8
Template (Smart matching) Re−registration
Setting Position:
Re−registration Area Display: No or Yes
Execution Position, Adjustment Position:
Re−registration Area Display: No
Area display when set to "Yes" (first IN8 input)
Error example
Template No.
/IN1 to /IN2
Ready signal
/READY
Template
/IN8
re−registration
input
Error signal
/ERROR
The ERROR signal output conditions are as follows:
Setting position
− You specified a non−existent checker.
− The specified checker number is set for an image from a camera other than that set
for the capture camera.
− The capacity was exceeded.
− You attempted to register an image without features.
Execution position
− You specified a non−existent checker.
− The specified checker number is set for an image from a camera other than that set
for the capture camera.
− The result of number of detected objects from execution of the smart matching
checker was 0.
Adjustment position
− You specified a non−existent checker.
− The specified checker number is set for an image from a camera other than that set
for the capture camera.
− Execution of position adjustment resulted in part of the template area protruding off
the screen.
16 − 46
OFF
ON
OFF
ON
OFF
ON
OCR Type A230
Advertisement
