Advertisement
Inspection Procedure
OCR Type A230
4.14
Changing Shapes
4.14 Changing Shapes
A shape change is applied at the position displayed before the change, with the default
size of the changed shape.
A shape cannot be changed if the whole of the inspection area is included within the
mask area. The "No serching area exists. Changes can't be stored." error message is
displayed. Move the area to the center of the screen before attempting the shape
change again.
If an attempt is made to change a shape at the edge of the screen and the "Position is
out of image range." message is displayed, move the area to the centre of the screen
before attempting the shape change again.
4 − 30
Advertisement
