Advertisement
OCR Type A230
5.3
Product Types
You can register a maximum of 32 sets of inspection condition data in the controller.
This inspection data is called a TYPE, and each type is managed by giving it a title. The
Type screen allows you to switch between product types, copy or delete them, and set
how to display them.
5.3.1
Menu Screen
TYPE [ 1]:
[1] TYPE
No.
01
1. Copy Type
2. Delete Type
3. Input Type Title
4. Capture Camera
5. Camera/Image
6. Menu Setting
7. Initialize All Type
TYPE [1]:
Input the type number. Input any number in the range 1 to 32.
If data has already been set for the number entered, the appropriate settings are
displayed. If no data has been entered, then only the product type number is
displayed.
1.
Copy Type
Copies the type data.
2.
Delete Type
Deletes the type data.
3.
Input Type Title
Allows you to enter a title for the type. If you select Input Type Title, the Keyboard
menu is displayed, allowing you to enter a title. You can enter up to 16 characters
for a title.
4.
Capture Camera
Set the image capture camera for each type.
5.
Camera/Image
Select the camera image tobe displayed on the monitor.
6.
Menu Setting
The settings made here are used for the display when the controller power is turned
on.
Rest: 432520
A
A: Gray−Thru
Environment and Product Type
5.3
Product Types
5 − 13
Advertisement
