Advertisement
Position and Rotation Adjustment
6.4
Position Adjustment Groups
Multiple Position/Rotation Adjustment Checker Settings
It is possible to set multiple Position/Rotation Adjustment checkers for one image. The
Position/Rotation Adjustment checkers are executed in order from the smallest checker
number.
Set a checker in Rotation Adjustment mode and set a Position Adjustment mode
checker to follow this. With this type of setting, it is possible to adjust following checkers
by the movement adjustment (∆X and ∆Y) and the rotation adjustment (∆θ).
Procedure:
1.
Create Position/Rotation Adjustment checker No. 1.
2.
Create a Gray Edge Vertical Detection Rotation Adjustment
checker.
3.
Set the Reference checker area and conditions, and set the
base position.
TEST
4.
Set Position/Rotation Adjustment Group No. 0.
5.
Create Position/Rotation Adjustment checker No. 2.
6.
Select Gray Edge Position Adjustment mode.
7.
Set the Reference checker area and conditions, and set the
base position.
Position/Rotation Adjustment
checker No. 2 (Position Adjustment)
Group No. 1
8.
Set Position/Rotation Adjustment Group No. 1.
9.
Create Character Verification checker No. 1.
6 − 36
Position/Rotation Adjustment checker No. 1
(Vertical Detection Rotation Adjustment)
Group No. 0
TEST
OCR Type A230
Position/Rotation Adjustment
checker No. 1 (Vertical Detection
Rotation Adjustment)
Group No. 0
Advertisement
