Panasonic A230 User Manual page 62

Inspection Procedure
4.11 Checker Area Setting Method
4.11 Checker Area Setting Method
4.11.1 Rectangle / circle (oval)
Press ENTER to switch between Move all, Move start point, Move end point and Fix.
Press C to go in the opposite direction.
Use the cursor lever to move the whole area, the start point and the end point.
ENTER
4.11.2 Line
Press ENTER to switch between Move all, Move start point, Move end point and Fix.
Press C to go in the opposite direction.
Use the cursor lever to move the whole area, the start point and the end point.
ENTER
Note
When setting a line shape for position and rotation adjustment,
only a horizontal line can be set when the scanning direction is
horizontal, and only a vertical line can be set when the scanning
direction is vertical. (Diagonal lines cannot be set.)
4 − 26
C
C
ENTER
C
ENTER
C
OCR Type A230
ENTER
ENTER