Advertisement
Environment and Product Type
5.3
Product Types
7.
Initialize all Types
Returns all product type settings to the original factory settings. Note that if you
select this, all the product data you have entered will be deleted.
Rest:
Displays the amount of available memory for setting the product type data.
Notes
The following restrictions apply to the settings for type data.
1. The amount of data for all checkers for all product types must
not exceed 1024 bytes (approximately).
2. The total number of checkers set for all product types must
not exceed 4096(*1).
(*1) The method for counting differs according to the checker.
Product types, character recognition, numerical calculations,
judgment outputs and simple spreadsheets: Each is counted
as one checker
Position/rotation adjustment − gray edge reference: Number of
reference checkers + 2 (and + 1 in the case that priority is
specified)
For example, the checker count is 15 in the case of
position/rotation adjustment of gray−edge reference with
priority specified.
Position/rotation adjustment − matching reference: (2 x
number of reference checkers) + 2
Character verification inspection: (2 x number of registered
characters) + 2
Smart matching: every two are counted as one checker.
5 − 14
OCR Type A230
Advertisement
