Advertisement
OCR Type A230
4.1
Before Starting an Inspection (Checker Setting
Procedure)
Select a checker suitable for the inspection to be performed.
See:
4−2 IC Inspection Example (p. 4 − 4)
4−3 Connector Inspection Example (p. 4 − 12)
4−4 IC Inspection Example (p. 4 − 15)
Create the checker
Select a camera
See:
4−9 Selecting Camera (p. 4 − 23)
Set the inspection method and conditions (checker settings).
See:
4−10 Area Setup and Out−of−Area Range (p. 4 − 24)
4−11 Checker Area Setting Method (p. 4 − 26)
Setting judgment conditions and processing conditions
See:
4−12 Setting Masking (p. 4 − 28)
4−13 Filter Setup (p. 4 − 29)
Settings for position/rotation adjustment
See:
4−8 Specifying Position and Rotation Adjustment Group (p. 4 − 22)
Perform a test
Set the inspection result output method
Start the inspection
4.1 Before Starting an Inspection (Checker Setting Procedure)
Inspection Procedure
4 − 3
Advertisement
