Advertisement
Useful Functions
15.1
Loading and Saving Image Data
15.1.5
Conditions for deleting image data
When the processes listed below are performed, all images are cleared, including
locked images.
− Power off
− Change camera mode (camera setting)
− Change the Save Image Data setting
− Delete/Initialize/Copy product type
− Initialize the environment settings
− Switch the capture camera setting to a different product type
15.1.6
Hints for restoring images using VBT Ver. 2
(Vision Backup Tool Ver. 2)
When restoring images using VBT Ver. 2 (Vision Backup Tool Ver. 2), there is no
distinction between cameras 1 and 2, or between cameras A and B. It is possible to
restore the product type of camera 2 to the product type of camera 1. Consequently,
discrepancies may arise between the index display and the camera link under the
following conditions:
− When the product type of camera 2 is restored to the product type of current camera
1.
− When the product type of camera 1 is restored to the product type of current camera
2.
− When the product type of camera 1(B) is restored to the product type of current
camera 1 (A)
− When the product type of camera 1(A) is restored to the product type of current
camera 1 (B)
If discrepancies arise, either:
− Do not upload a product type that has different camera connection information, or
− Delete all images saved before invoking VBT Ver. 2 (Vision Backup Tool Ver. 2).
15 − 6
OCR Type A230
Advertisement
