Advertisement
OCR Type A230
435. Output Char.
Set the number of maximum characters per character recognition
checker.
436. Numerical Calculation
Set whether or not to output the numerical calculation result.
437. Judgment
Set whether or not to output the judgment result.
438. Char. Recog.
Set whether or not to output the character recognition result.
PLC communication settings
Data length: Set to same as the ICH "Bit length"
Parity check: Set to same as the ICH "Parity"
Communication speed setting: Set to same as the ICH "Transmission speed"
FP2 (COM port) communication example
− Description of result output from the Imagechecker
<Numerical calculation results>
CA01=1234
CA02=–12
CA03=Not set
CA04=56
CA05 and on =Not set
− Communication conditions
Transmission speed: 9600
Operation: Computer link
Stop bits: Set to same as the ICH "Stop bits"
C
Stop code:
R
Start code: No STX
<Judgment output >
Bit length: 8
Stop bits: 2
Parity: Odd
Communications (Serial and Parallel)
JD01=ON
JD02=Not set
JD03=OFF
JD04=OFF
JD05 and on =Not set
16.11 Computer Link
16 − 61
Advertisement
