Advertisement
OCR Type A230
16.10 Referencing and Changing the Maximum and Minimum Limits for Numerical Calculations
16.10.2 Referencing Maximum/Minimum Limits
%F??
Register No. (2 digits)
C
C
%F01
to %F32
R
R
numerical calculation.
When the maximum and minimum values for a numerical calculation are referenced
normally, %F followed by the Register No., Minimum value and Maximum value
(delimited with commas), and
has not been set is specified, the maximum and minimum values for the numerical
calculation will not be referenced normally, and %Z
16.10.3 Changing the Maximum and Minimum Limits
C
%N??,n,n
R
Maximum value (– 2147483648 to 2147483648)
Minimum value (– 2147483648 to 2147483648)
Register No. (2 digits)
To change the maximum and minimum limits, send %N followed by the minimum limit,
and the maximum limit and
When the maximum and minimum values for a numerical calculation are changed
normally, %N followed by the Register No., Minimum value and Maximum value
(delimited with commas), and
are used to reference the maximum and minimum values for a
C
are returned as the response. If a Register No. that
R
C
(delimited by commas).
R
C
are returned as the response.
R
Communications (Serial and Parallel)
C
is returned as the response.
R
16 − 55
Advertisement
