Figure 2-5 The Eclipse Median Houses Three Types Of Rear-Connector Panels - Clear-Com ECLIPSE MEDIAN MATRIX Instruction Manual

You can precisely locate a
port with its row and column
numbers as shown in Figure
2-7.
2 - 1 6
Ports
Figure 2-5: The Eclipse Median houses three types of rear-connector
There are five types of rear-connector panels:
• The CPU-card rear panel holds the various connectors associated
with the CPU card, such as the RS-232 connector for the
configuration computer. The CPU-card rear connectors are
discussed in the next section.
• A port-card rear panel holds the sixteen RJ-45 connectors associated
with its corresponding front-panel port card. Remote intercom
panels and interfaces connect to the matrix through this
rear-connector panel.
• A fiber card provides two ports to connect fiber network cables.
• An E-Que card provides eight RJ-45 ports for connection to wireless
equipment and three RJ-45 ports for DECT sync and LAN
connections.
• Blank panels covers unused slots in the matrix.
Interfaces
CPU
panels
Vitec Group Communications
Eclipse Median Instruction Manual