Advertisement
Available languages
Available languages
Care & Cleaning
CLEAN & DESCALE CYCLE
The Bambino Espresso machine requires
regular cleaning and descaling.
When this is due, the 2 Cup button will
continuously flash, indicating the machine
needs cleaning and descaling.
NOTE
Pressing any of buttons will cancel the alert
and return the machine to ready mode.
WARNING
It is NOT recommended to ignore the clean
cycle warning because after regular use,
hard water can cause mineral build-up
in and on many of the inner functioning
components, reducing the brewing flow,
brewing temperature, power of the machine,
and the taste of the espresso.
WARNING
Do not immerse the power cord, power plug
or appliance in water or any other liquid.
The water tank should never be removed
or completely emptied during descaling.
TO PERFORM A CLEAN &
DESCALE CYCLE
1. Empty the drip tray and re-insert firmly into
position on the machine.
2. Fill the water tank to the DESCALE line
indicated and add the descaling agent
to the water.
1000
DESCALE
3. Place a 2 Litre (68 fl.oz) container under
the group head and steam wand.
+
4. Press the 2 Cup and Steam buttons
simultaneously for 5 seconds to start
descaling.
NOTE
The 2-Cup button will flash throughout the
cycle.
5. Once the descale solution has been used
up, the descale mode will pause.
6. Rinse and refill the water tank to the MAX
line and empty the waste water container,
then replace both parts on to the machine
to proceed onto the rinse cycle.
7. Press the 2 Cup button to proceed rinse
cycle.
8. When the rinse cycle is complete,
the machine will then go into ready mode.
2
L
68oz
5s
&
EN
17
Advertisement
