Care & Cleaning - Sage Barista Touch Impress User Manual

Care &
Cleaning
COLOUR TOUCH SCREEN DISPLAY
Please keep the touch screen dry and clean
to ensure that the machine functions properly.
REPLACING THE WATER
FILTER IN THE WATER TANK
1 2
Set date 3 months Soak water lter
ahead for 5 mins
4 5
MAX
Install lter in Fill water tank to
water tank MAX mark
The provided water filter helps reduce the risk
of scale build-up in and on many of the inner
functioning components. Replacing the water
filter every three months will reduce the need to
descale the machine. If you live in a hard water
area, it is recommended to change the water
filter more frequently.
• Remove the filter from the plastic bag, and soak
in a cup of water for 5 minutes.
• Rinse the filter under cold running water for
5 seconds.
• Insert the filter into the filter holder.
• Set the date dial 3 months ahead.
• To install, push down the filter to lock into place.
NOTE
For replacement of water filters contact Sage
Customer Service Centre or visit our website
at www.sageappliances.com.
3
H 0
2
5m
Place lter into lter
holder
6
Insert & lock
water tank
CLEANING CYCLE
There will be a message prompt when
a cleaning cycle is required. This is a back-
flushing cycle and is separate from descaling.
Follow the instruction on the screen.
WARNING
After regular use, hard water can cause mineral
build up in and on many of the inner functioning
components, reducing the brewing flow, brewing
temperature, power of the machine, and taste of
the espresso.
DESCALING
Even with the provided water filter, it is
recommended to descale if there is scale build-
up in the water tank.
Go to 'Settings' and select 'Descale cycle'.
Follow the instructions on the screen.
NOTE
Ensure that the water filter is removed from the
water tank before adding the descaling powder
when descaling the machine.
• While the cleaning cycle is important for keeping
the brew head clean from coffee oils; the
descaling cycle is essential to ensure that the
machine is kept clean on the inside and free from
mineral build-up.
• Do not use bottled water when descaling. Most
bottled water may contain dissolved solids that
can leave deposits inside the machine.
EN
19