Exit Menu; Figure 5-5 Exit Menu; Table 5-26 Exit Menu - SMART Embedded Computing COMX-CORE-2610-ET Installation And Use Manual

Exit Menu

5.5.5 Exit Menu
Figure 5-5 Exit Menu

Table 5-26 Exit Menu

Field
Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
Load Optimized Defaults
Discard Changes
80
Description
Save all changes of all menus, then exit setup configure driver.
Finally resets the system automatically.
You can also press <F10> to perform this task.
Exit the setup configure driver, without saving changes. You
can also press <F10> to perform this task.
Load standard default values.
You can also press <F9> to perform this task.
Load settings for optimized boot time and system performance.
Load the original value of this boot time. Not the default setup
value.
COMX-CORE-2610-ET Installation and Use (6806800P11E)
BIOS