Table 5-22 Amt Configuration; Table 5-23 Me Configuration - SMART Embedded Computing COMX-CORE-2610-ET Installation And Use Manual

Advance Menu
Table 5-21 Hardware Monitor (continued)
Field
VCORE
5V
1.5V
VGFX
Automatic FAN Control

Table 5-22 AMT Configuration

Field
Intel AMT
Intel AMT Hot Key
Intel AMT Setup Prompt
Activate Remote
Assistance Process
Un-Configure ME
USB-R Feature

Table 5-23 ME Configuration

Field
ME FW Version
ME Firmware
Intel ME
76
Description
Showing VCORE Voltage
Showing 5V Voltage
Showing 1.5V Voltage
Showing VGFX Voltage
Enable or Disable automatic FAN control. Default setting is Enabled.
Description
Enable/Disable Intel® Active Management Technology BIOS
Extension. Note: iAMT H/W is always enabled. This option just controls
the BIOS ex- tension execution. If enabled this requires additional
firmware in the SPI device. Default setting is Enabled.
Enable or Disable Intel AMT Hot-Key during POST to enter MEBX
setup. Default setting is Enabled.
Enable/Disable Intel AMT Setup Prompt to wait for hot-key to enter
setup. Default setting is Disabled.
Trigger CIRA boot. Default setting is Disabled.
Un-Configure ME without a password. Default setting is Disabled.
Enable/Disable USB-R. Default setting is Disabled.
Description
Intel Management Engine firmware version.
Intel Management Engine firmware state.
Enable/Disable Intel® Management Engine. Default setting is Enabled.
COMX-CORE-2610-ET Installation and Use (6806800P11E)
BIOS