Table 5-10 Hdd Configuration; Table 5-11 Software Feature Mask Configuration; Table 5-12 Memory Configuration - SMART Embedded Computing COMX-CORE-2610-ET Installation And Use Manual

Advance Menu

Table 5-10 HDD Configuration

Field
SATA Device
Interface Combination
RAID Alternate Device ID
Software Feature Mask
Configuration
Serial ATA Port 0 / Hard Disk 0
Serial ATA Port 1 / Hard Disk 1
Serial ATA Port 2 / Hard Disk 2
Serial ATA Port 3 / Hard Disk 3
Serial ATA Port 4 / Hard Disk 4
Serial ATA Port 5 / Hard Disk 5
Table 5-11
Field
RAID0
RAID1
RAID10
RAID5

Table 5-12 Memory Configuration

Field
Memory Frequency
72
Description
Enable/Disable SATA device. Default setting is Enabled.
Select the SATA controllers operation mode. Default setting is
Enabled.
Changes the device ID to 292X from 282X in RAID mode to
prevent the IMSM driver from loading on the platform. Default
setting is Disabled.
Software Feature Mask Configuration.
Display the identity of the device attached.
Display the identity of the device attached.
Display the identity of the device attached.
Display the identity of the device attached.
Display the identity of the device attached.
Display the identity of the device attached.
Software Feature Mask Configuration
Description
Enable/Disable RAID0 feature. Default setting is Enabled.
Enable/Disable RAID1 feature. Default setting is Enabled.
Enable/Disable RAID10 feature. Default setting is Enabled.
Enable/Disable RAID5 feature. Default setting is Enabled.
Description
Maximum memory frequency selections in MHz. Default setting is Auto.
COMX-CORE-2610-ET Installation and Use (6806800P11E)
BIOS