Table 5-25 Tpm Configuration - SMART Embedded Computing COMX-CORE-2610-ET Installation And Use Manual

Security Menu
Table 5-24 Security Menu (continued)
Field
Min. password length
Authenticate User on
Boot
TPM Support

Table 5-25 TPM Configuration

Field
Current TPM State
Change TPM States
78
Description
Set the minimum number of characters for password (1 -20). Default
setting is 1.
Enable/Disable User Authentication Prompt on boot. Default setting is
Disabled.
This is used to decide whether TPM support should be enabled or
disabled. Default setting is Disabled.
Description
Current TPM State.
Change TPM state. Note: Most TPM options require TPM to be Enabled
to take effect.
COMX-CORE-2610-ET Installation and Use (6806800P11E)
BIOS