SMART Embedded Computing COMX-CORE-2610-ET Installation And Use Manual page 19

Product Damage
High humidity and condensation on surfaces cause short circuits.
Do not operate the product outside the specified environmental limits. Make sure the
product is completely dry and there is no moisture on any surface before applying power.
Expansion and FRU Replacement
Product Damage
Bent pins or loose components can cause damage to the product, the backplane, or other
system components.
Carefully inspect the product and the backplane for both pin and component integrity before
installation.
Personal Injury
During operation, hot surfaces may be present on the heat sinks and components of the
product.
To prevent injury from hot surfaces do not touch any of the exposed components or
heatsinks on the product when handling. Use the handle and face plate when removing the
product from the enclosure.
Battery
Data Loss
If the battery does not provide enough power anymore, the RTC is initialized and the data
in the NVRAM is lost.
Replace the battery before seven years of actual battery use have elapsed.
Exchanging the battery always results in data loss of the devices which use the battery as
power backup.
Back up affected data before exchanging the battery.
Installing another battery type than the one that is mounted at product delivery may cause
data loss since other battery types may be specified for other environments or may have a
shorter lifetime.
Only use the same type of lithium battery as is already installed.
COMX-CORE-2610-ET Installation and Use (6806800P11E) 19