Table 5-8 Processor Power Management; Table 5-9 Peripheral Configuration - SMART Embedded Computing COMX-CORE-2610-ET Installation And Use Manual

Table 5-7
Field
Intel® Trust Execution
Technology
Processor Power
Management
Table 5-8
Field
Intel SpeedStep (tm)
Turbo Mode
C-States
C3-State
C6-State
C7-State
C7s-State
Table 5-9
Field
PCIe SR-IOV Support
COMX-CORE-2610-ET Installation and Use (6806800P11E)
Processor Configuration (continued)
Description
Enables utilization of additional hardware capabilities provided
by Intel ® Trust Execution Technology. Default setting is
Disabled.
Processor power management configuration, see later
description.
Processor Power Management
Description
Enable processor performance states (P-States). Default setting is
Enabled.
Enable processor Turbo Mode. EMTTM must also be enabled. Default
setting is Enabled.
Enable processor idle power saving states (C-States). Default setting
is Enabled.
Enable processor idle power saving C3 state. Default setting is
Enabled.
Enable processor idle power saving C6 state. Default setting is
Enabled.
Enable processor idle power saving C7 state. Default setting is
Enabled.
Enable processor idle power saving C7s state. If enabled, BIOS will
report C7s instead of C7 to OS. Default setting is Disabled.
Peripheral Configuration
Description
Set IO virtualization. Default setting is Disabled.
Advance Menu
71