5. Programming keypad
5.6
Monitoring of operation status
Monitoring output current in Drive group
1
2
3
4
♣
Other parameters in Drive group such as dCL (Inverter DC link current) or vOL (Inverter output voltage) can
be monitored via the same method.
Drive group
-. In [0.0], continue pressing the Up ( ) or Down ( ) key until [Cur] is displayed.
-. Monitoring output current is provided in this parameter.
-. Press the Prog/Ent ( ) key once to check the current.
-. Present output current is 5.0 A.
-. Press the Prog/Ent ( ) key once to return to the parameter name.
-. Return to the output current monitoring code.
5-10
SV-iC5