LG SV-iC5 Series Instruction Manual page 107

Parameter Lock
Group LED Display
Function
H95
group 2
H94
This parameter is used to lock the user-set parameters using the password.
See the table below to lock the user-set parameter via the H94 – [Password Register].
Step
1 Go to H95 – [Parameter lock]
2 Enter the Prog/Ent ( ) key
Parameter value can be changed in UL (Unlock) status. While seeing this
3
message...
4 Enter the Prog/Ent ( ) key.
5 Enter the password created in H94 (e.g.: 123).
6 Enter the Prog/Ent ( ) key
7 Parameter value cannot be changed in L (Lock) status.
8 Press either the left ( ) or right ( ) key.
See the table below to unlock the user-set parameter via password.
Step
1 Go to H94 – [Password register]
2 Press the Prog/Ent ( ) key
3 Parameter value cannot be changed in L(Lock) status.
4 Press the Prog/Ent ( ) key
5 Enter the password created in H94 (e.g.: 123).
6 Press the Prog/Ent ( ) key
Parameter value can be changed in UL (Unlock) status. While seeing this
7
message...
8 Press the Prog/Ent ( ) key
Parameter Name
[Parameter lock]
[Password Register]
Description
Description
10-19
10. Advanced functions
Set Min/Max
value Range
0/FFF
-
0/FFF
-
Factory
Unit
Defaults
0
0
LED Display
H95
UL
UL
0
123
L
L
H95
LED Display
H94
L
L
0
123
UL
UL
H95
SV-iC5