How to monitor Motor rpm in Drive group when the motor is rotating in 1730 rpm.
Drive group
1
2
3
4
5
-. Present run frequency can be monitored in the first code of Function group 1. The
preset frequency is 57.6Hz.
-. Continue pressing the Up ( ) /Down ( ) key until rPM is displayed.
-. Motor rpm can be monitored in this code.
-. Press the Prog/Ent ( ) key once.
-. Last three digits 730 in 1730 rpm is shown on the LED.
-. Press the Left ( ) key once.
-. First three digits 173 in 1730 rpm are shown on the LED.
-. Press the Prog/Ent ( ) key once.
-. Return to the rPM code.
5-11
5. Programming keypad
SV-iC5