Basic Functions; Frequency Mode - LG SV-iC5 Series Instruction Manual

9. Basic Functions

9.1

Frequency mode

Digital Frequency setting via Keypad 1
Group LED Display
Drive
0.0
group
Frq
Run frequency is settable in 0.0 - [Frequency Command].
Set Frq – [Frequency mode] to 0 {Frequency setting via Keypad 1}.
Set the desired frequency in 0.0 and press the Prog/Ent ( ) key to enter the value into memory.
The value is settable not greater than F21 – [Max frequency].
Digital Frequency setting via Keypad 2
Group LED Display
Drive
0.0
group
Frq
Run frequency is settable in 0.0 - [Frequency Command].
Set Frq – [Frequency mode] to 1{Frequency setting via Keypad 2}.
In 0.0, frequency is changed upon pressing the Up ( )/Down ( ) key. It is seleted to use the Up/Down key as
potentiometer on keypad.
The value is settable not greater than F21 – [Max frequency].
Parameter Name
[Frequency Command]
[Frequency mode]
Parameter Name
[Frequency Command]
[Frequency mode]
9-1
Set Min/Max
Value Range
- 0/400
0 0/8
Set Min/Max
Value Range
- 0/400
1 0/8
9. Basic functions
Factory
Unit
Defaults
0.0 Hz
0
Factory
Unit
Defaults
0.0 Hz
0
SV-iC5