LG SV-iC5 Series Instruction Manual page 32

5. Programming keypad
When changing run frequency to 30.05 Hz in Drive group
Drive group
1
2
3
4
5
6
7
8
9
♣
Three digit LED display is provided in SV-iC5 Series. However, digit expansion is available using the
Left( )/Right( ) key for parameter setting and monitoring.
♣
In step 8, pressing the Left ( ) or Right ( ) key while 30.0 is blinking will disable the setting.
-. In "0.0", press the Prog/Ent ( ) key once.
-. The second 0 in 0.0 is active.
-. Press the Right ( ) key once to move the cursor to the right.
-. 0.00 is displayed
-. Press the Up ( ) key until 5 is displayed.
-. Press the Left ( ) key once.
-. The middle digit in 0.05 is active.
-. Press the Left ( ) key once.
-. Press the Left ( ) key once.
-. 00.0 is displayed with the first 0 active, but the actual value 0.05 remains unchanged.
-. Press the Up ( ) key to set to 3.
-. Press the Prog/Ent ( ) key once.
-. 30.0 is blinking.
-. Press the Prog/Ent ( ) key once.
-. Run frequency is set to 30.0 when the blinking stops.
5-8
SV-iC5