LG SV-iC5 Series Instruction Manual page 50

7. Function list
LED Parameter
display name
H 0 [Jump code]
H 1 [Fault history 1]
H 2 [Fault history 2]
H 3 [Fault history 3]
H 4 [Fault history 4]
H 5 [Fault history 5]
H 6 [Reset fault
history]
H 7 [Dwell
frequency]
H 8 [Dwell time]
H10 [Skip
frequency
select]
H11 [Skip
1) frequency low
limit 1]
H12 [Skip
frequency high
limit 1]
H13 [Skip
frequency low
limit 2]
H14 [Skip
frequency high
limit 2]
H15 [Skip
frequency low
limit 3]
Min/Max
range
1/95 This parameter sets the code number to jump.
- This parameter stores information on the
types of faults, the frequency, the current and
-
the Accel/Decel condition at the time of fault.
-
The last fault is automatically stored in the
-
H 1- [Fault history 1].
-
0/1 This parameter clears the fault history
saved in H 1-5.
F23/400 When run frequency is issued, motor starts
[Hz] to accelerate after dwell frequency is applied
to the motor during H8- [Dwell time].
[Dwell frequency] can be set within the
range of F21- [Max frequency] and F23- [Start
frequency].
0/10 [sec] This parameter sets the time for dwell
operation.
0/1 This parameter sets the frequency range to
skip to prevent undesirable resonance and
vibration on the structure of the machine.
0/400 Run frequency cannot be set within the
[Hz] range of H11 thru H16.
The frequency values of the low numbered
parameters cannot be set above those of the
high numbered ones.
Description
7-8
Function group 2
Factory Adjustable
defaults during run
1 O
nOn -
nOn -
nOn -
nOn -
nOn -
0 O
5.0 X
0.0 X
0 X
10.0 X
15.0 X
20.0 X
25.0 X
30.0 X
SV-iC5
Page
5-5
11-4
10-5
9-20