Installation; Installation Precautions - LG SV-iC5 Series Instruction Manual

2. Installation

2.1

Installation precautions

Handle the inverter with care to prevent damage to the plastic components. Do not hold the inverter by the front
cover. It may fall off.
Install the inverter in a place where it is immune to vibration (5.9 m/s
of ambient temperature.
Install in a location where temperature is within the permissible range (-10~50°C)
Temperature is 50°C. Models SV004iC5-1, SV004iC5-1F, SV008iC5-1, and SV008iC5-1F can be used in
Ambient 40°C. (UL 508C)
`
The inverter will be very hot during operation. Install it on a non-combustible surface.
Mount the inverter on a flat, vertical and level surface. Inverter orientation must be vertical (top up) for proper heat
dissipation. Also leave sufficient clearances around the inverter.
5cm
Min
Protect from moisture and direct sunlight.
Do not install the inverter in any environment where it is exposed to waterdrops, oil mist, dust, etc. Install the
inverter in a clean place or inside a "totally enclosed" panel which does not accept any suspended matter.
CAUTION
5cm
<Ambient Temp Checking Location>
10cm Min
5cm
Min
10cm Min
2
or less). The inverter is under great influence
5cm
5cm
Leave space enough to
allow cooled air flowing
easily between wiring
duct and the unit
2-1
2. Installation
.
Maximum Surrounding Air
Cooling air
Ventilating fan
SV-iC5