LG SV-iC5 Series Instruction Manual page 106

10. Advanced functions
Password Register
Group LED Display
Function
H94
group 2
H95
This parameter creates password for H95 – [Parameter lock].
Valid password is Hex decimal value (0-9, A, B, C, D, E, F).
☞ Caution:
Do not forget the registered password. It is also used when unlocking the parameters.
Factory default password is 0. Enter the new password except 0.
Follow the table below to register password for Parameter lock.
Step
1 Jump to H94 – [Password Register].
2 Press the Prog/Ent ( ) key twice.
3 Enter the password you wish (e.g.: 123).
4 "123" is blinking by pressing the Prog/Ent ( ) key.
4 Press the Prog/Ent ( ) key once to enter the value into memory.
Follow the table below to change the password. (Current PW: 123 -> New PW: 456)
Step
1 Jump to H94 – [Password Register].
2 Press the Prog/Ent ( ) key once.
3 Enter any number (e.g.: 122)
Press the Prog/Ent ( ) key. 0 is displayed because wrong value was
4
entered. Password cannot be changed in this status.
5 Enter the right password.
6 Press the Prog/Ent ( ) key once.
7 Enter a new password.
8 Press the Prog/Ent ( ) key. Then "456" will blink.
9 Enter the Prog/Ent ( ) key to finish.
Parameter Name
[Password Register]
[Parameter lock]
Description
Description
10-18
Set Min/Max
value Range
- 0/FFF
- 0/FFF
Factory
Unit
Defaults
0
0
LED Display
H94
0
123
123
H94
LED Display
H94
0
122
0
123
123
456
456
H94
SV-iC5