Parameter Setting Method - LG SV-iC5 Series Instruction Manual

Lg inverter instructions manual
Hide thumbs Also See for SV-iC5 Series:
Table of Contents

Advertisement

5.5

Parameter setting method

Changing parameter value in Drive group
When changing ACC time from 5.0 sec to 16.0
Drive group
1
2
3
4
5
6
7
8
In step 7, pressing the Left ( ) or Right ( ) key while 16.0 is blinking will disable the setting.
Note) Pressing the Left ( )/ Right ( ) /Up ( ) /Down ( ) key while cursor is blinking will cancel the parameter value
change.
-. In the first code "0.0", press the Up ( ) key once to go to the second code.
-. ACC [Accel time] is displayed.
-. Press the Prog/Ent key ( ) once.
-. Preset value is 5.0, and the cursor is in the digit 0.
-. Press the Left ( ) key once to move the cursor to the left.
-. The digit 5 in 5.0 is active. Then press the Up ( ) key once.
-. The value is increased to 6.0
-. Press the Left ( ) key to move the cursor to the left.
-. 0.60 is displayed. The first 0 in 0.60 is active.
-. Press the Up ( ) key once.
-. 16.0 is set.
-. Press the Prog/Ent ( ) key once.
-. 16.0 is blinking.
-. Press the Prog/Ent ( ) key once again to return to the parameter name.
-. ACC is displayed. Accel time is changed from 5.0 to 16.0 sec.
5-7
5. Programming keypad
SV-iC5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents