Image Actions From Load Images Screen; View Images Screen - VWR Gel Documentation Imager2 Instruction Manual


To de-select an image, select the image again in the central pane or select the red Dismiss icon
in the corner of the image in the Selected Images pane.

Image Actions from Load Images Screen

Once you have located your image(s) using the Load Images screen there are two image actions available;
View Images and Edit. The two Image Action icons are displayed at the bottom of the Load Images
screen.

Initially these icons are initially greyed-out (unavailable), only becoming active once an image has
been selected.

Selecting the View Images icon opens the View Images screen with the image(s) selected on the
Load Images screen displayed in the view pane.

Selecting the Edit icon opens the Image Edit screen with the image(s) selected on the Load
Images screen displayed in the Selected Images pane.

For the actions that can be performed using these screens refer to View Images Screen and
Image Edit Screen sections of this Guide.

View Images Screen

The View Images screen is used to view and compare captured images. Images can be saved or unsaved.
The View Images screen can be accessed as follows:

The View Images function is only available when captures have been made during the current
Gel Doc image capture software session and images have been saved, are unsaved, or when
previously saved images have been selected using the Load Images function.

From the Home screen - by selecting the View Images icon

From the Classic View Home screen - by selecting the View Images icon

The View Images screen can also be accessed from any other screen displaying the View
Images icon
vwr.com
78
HOME SCREEN
in the Image Action icons.
Instruction manual VWR
®
Imager2
.
.