Operating The Pcr Cycler - VWR XT96 Instruction Manual

Generate a "Network Configuration USB-Stick"
1. Power on a XT
or start the XT
2. Use the "System" dialogue in the Software and
click on "Thermal Block" and "Configure USB
Stick"
3. Insert an USB Stick into the Cycler or PC.
4. Configure the network settings for the
XTender thermal cycler, as shown in the
96
picture.
5. Make sure each instrument name is unique and press OK.
6. A "XT96ConfigFile" file will be generated and stored on the USB stick.
7. Use this "Network Configuration USB Stick" to set up the Network configurations on your
XTender Thermal Cycler.
96
Note: Every XTender
instrument name is unique.
OPERATING THE PCR CYCLER XT
General operation
The operation of the thermal cycler can be run by the internal touch screen, by using the touch sensitive
surface of the display or by using a mouse connected to an available USB port. Furthermore, the
thermal cycler can also be controlled by computer integrated to a network. The supplied application
software offers the same functions as the internal thermal cycler software, except for some system
settings.
If the user has to enter numbers or text the corresponding field has to be touched on the touch screen
or clicked with the mouse. An appropriate keyboard will appear on the screen according to the
expected entry.
10
vwr.com I Instruction manual VWR
Thermal Cycler (Master unit)
96
PC Software on your PC.
96
Thermal Cycler needs a separate "XT96ConfigFile" file where the
96
PCR Cycler XT
® 96
96