Table of Contents
Advertisement
1 Overview
The Keysight S9101A 5G Multi-Band Vector Transceiver
is a streamlined, non-signaling measurement system that enables automated testing
of 5G New Radio (5G NR) infrastructure equipment in both the FR1 (380 MHz to 6 GHz)
and millimeter wave FR2 frequencies (24.25 to 43.5 GHz).
In this document...
This document describes the installation process to start up and prepare the
Keysight S9101A 5G Multi-Band Vector Transceiver for use.
1. Review this Overview
2.
Review Safety Requirements on page 3
3.
Review Hardware Components on page 19
4.
Install Hardware on page 31
5.
Install Software on page 35
6.
Verify Operation on page 37
7.
Run an IF Cable Alignment on page 53
8.
Run a System Amplitude Calibration on page 55
Keysight S9101A 5G Multi-Band Vector Transceiver, Startup Guide
1 Overview
1
Advertisement
Table of Contents
