Working With Files; Viewing A List Of Stored Files; Viewing A List Of Files Stored On The Transceiver - Keysight Technologies M9411A Manual

Basic Operation

Working with Files

Working with Files

—
—
The transceiver recognizes several types of files, such as state files, license
files, and correction files. Files are stored in the controller internal storage. This
section provides an overview of how to navigate the file menus, and how to
view, store, load, and move files.
See also:

Viewing a List of Stored Files

The arbitrary waveform generator (ARB) files that have been created on the
transceiver can be viewed using the Waveform Selection screen.

Viewing a List of Files Stored on the transceiver

1. Select Input/Output key and RF Source tab.
2. Press Modulation Setup, ARB Setup.
3. Press Select Waveform.
The files listed are identified as either waveform sequences or waveform
segments. A sequence is made up of two or more segments.
Use mouse to highlight a waveform for selection. Once the desired file is
highlighted, use the Select Waveform key to select the waveform to be output.
18
"Viewing a List of Stored Files" on page 18
"Loading (Recalling) a Stored File" on page 19
"Storing, Loading, and Playing a Waveform Segment" on page 29.
Source User's Guide