Setting Up Mqtt Communication - Festo CPX-FB33 Operating Instructions Manual

Commissioning
Behaviour of the display elements of the bus node during commissioning in the CPX Terminal
LED Status
NF off
M/P off
TP1 on
TP2 on
Tab. 14: Behaviour of the display components after error-free commissioning
Information on troubleshooting in the event of incorrect behaviour è 9 Diagnostics.
7.2

Setting up MQTT communication

Requirement: the feature must be activated. This can be checked via the web server.
1. Set up the automation project for the higher-order controller using suitable software è 7.1
Setting up PROFINET communication.
2. Import the device description file into the software è 7.1 Setting up PROFINET communication.
3. Select MQTT from the list of submodules.
4. Add MQTT to the bus node as a submodule.
16
LED
PS
PL
SF
M
Festo — CPX(-M)-FB33/34/35/43/44/45 — 2022-05f
Status
on
on
off
off